Content Author List Administrator
Bottom End rebuild |
Putting the crank & pistons back |
Straightforward re-assembly with new rings & bearings plus some replacement conrods. |
Clamps for cylinder liners |
Cylinder Head Rebuilding |
Fitting guides & grinding valves |
New Bronze Guides needed reaming to 0.3110 inch followed by grinding & setting clearances. |
Cylinder Head strip-down |
as-found pics of the valvegear |
The jag head is a straightforward 2 valve head, apart from the number of cylinders these are straigh[...] |
Removal & Strip-down |
The Timing Chest |
Tensioner & oil pump |
Some quick views of these components on strip-down |